Ir directamente a la información del producto
1 de 1

ARRIVING MAY 3oz Frosted Shotglass

Precio habitual $3.50 USD
Precio habitual Precio de oferta $3.50 USD
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.

3oz Frosted Shot Glass, gold rim.

 

Application Instructions 3D Vacuum 

  1. Turn the 3D Vacuum Heat press on.
  2. Set the heating button so both the top and bottom heating lights are on.
  3. Set the Temperature to 200 degrees C and time to 13 minutes.
  4. Print a mirror image onto Paper.
  5. Trim the edges of the image and wrap around shot glass.
  6. Attach the image to shot glass using transfer release tape.
  7. Place the shot glasses within the mold and cover with the glass lid.
  8. Attach the rubber tube that is connected to the bottom of the 3D Vacuum Press to the white tube sticking out of the mold.
  9. Press vacuum button.
  10. Press the time button.
  11. Remove immediately once finished and peel hot. Use caution as shot glass will be very hot.

 

Application Instructions Press

  1. Change the heating element on the mug press to the shot glass heating element.
  2. Set temperature to 380-400 degrees Fahrenheit.
  3. Set timer to 120 seconds.
  4. Set Pressure at heavy.
  5. Print a mirror image onto Paper.
  6. Trim the edges of the image and wrap around mug.
  7. Attach the image to mug using transfer release tape.
  8. Press at 380-400 degrees F for 120 seconds with heavy pressure.
  9. Remove immediately from press once finished and peel hot

CONVECTION OVEN

1. Wrap with Design

2. Heat tape all the way down the edge

3. Cut shrink wrap bag and shrink wrap shot glass around design.

4. 400 degrees for 7 min 30 sec in convection oven. Stand it up on the rack so air moves all around it. 

Shipping